Here, you can define the section display and the properties of infills.
Dialog box Infill parameters
db_ath_panel_cs
Dialog box section Representation
Left Creates the left side of an infill, the right side is interrupted.
Complete Creates a complete infill without interruption.
Right Creates the right side of an infill, the left side is interrupted.
Mirror Mirrors the infill about its own axis.
Explode Releases the infill into its constituent parts. With a double click the exploded infill can no longer be edited as a whole, but instead only its layers.
Dialog box section Insert
Length, Inset, Gasket thickness With the buttons Length <, Inset < and Gasket thickness < you can access the appropriate values from the drawing. When you click one of the buttons, the dialog box is temporarily closed and you can select two points. The distance between the points is transferred into the corresponding input field. Alternatively, you can also write the value directly into the corresponding input field.
The insertion point of the infill is changed according to the entries made here, so that it can be correctly positioned.
Dialog box section Output
Insert text Activate this tick box to label a layer.
Text height Defines the text height of the label text.
Default Restores the default text height (current figure height dimension).
Dimensions If you activate the tick box, the infill is dimensioned.
Dialog box Overlaps
db_ath_panel_ueberstand
List Shows the available infill layers. Select a layer here to change its overlap.
Overlap left Defines the left overlap of the marked layer. The value entered here is adopted as default for the right side.
Overlap right Defines the right overlap of the marked layer.
