ATH Service > Plot 01 to Plot 06 ATHENA Standard > Plot 01 to Plot 06
Command input:
ath_plot01 - ath_plot06
You can plot drawings in an uncomplicated manner with these plotting commands. The routine automatically detects the orientation (portrait or landscape format) of the drawing and takes it into account during plotting. You can serve six different output media (printers or plotters with different formats and plotting styles). For this you must appropriately configure the plot script files (see Chapters Plotter configuration and Adjust plot script files).
Input request
Specify first corner or [?] <0.0>:
Use the mouse or enter coordinates to specify the first corner of the plotting area.
Press the Enter key to accept the default values.
Specify second corner or [?] <1189.841>:
Use the mouse or enter coordinates to specify the second corner of the plotting area.
Press the Enter key to accept the default values.
Enter the setting for shaded plot [As shown/ Wire frame/ Hidden / Rendered] <As shown>:
Use the option As shown to plot the view as displayed.
Use the option Wire frame to plot the view as a wire frame.
Use the option Hidden to leave the hidden lines unplotted.
Use the option Rendered to plot the view rendered.
Select scale: or [Adapt/?] <Adapt>:
At this point a context menu is opened where you can select the plotting scale.
Press the Enter key to enter a scale (e.g. 2 for 2:1 or 0.5 for 1:2). Press the Enter key again to accept the default scale.
Execute plotting [Ok/Exit]<OK>:
Press the Enter key to start the plotting process.
