Tab ATHENA > Group Drawing > Modify bending radius
Menu:
ATHENA > Sheet metal > Modify bending radius
Toolbar:
ATH Sheet metal > Modify bending radius
Command input:
ath_sheet_rmod
With this command you can individually change the bending radii of sheet metal sections as well as the routed grooves of composite panels.
Input request
Select fold of the sheet section or [?]:
Select a sheet metal section in the vicinity of the fold whose radius you want to change.
With the option ? you call the help.
When you have selected a sheet metal section, the following input request appears and when you have selected a composite panel (e.g. Alucobond), the Dialog box Bending radius/milling is opened.
Specify inner bending radius or [Reset/?] <1>:
Specify a new inner bending radius.
Select the option Reset if you want to reset the individually changed bending radii to defined values. This option is only available when bending radii have been individually changed on the selected sheet metal section.
Dialog box Bending radius/milling
db_ath_sheet_rmod
List Shows the available routed grooves for folding the composite panel. Select a routed groove and click OK.
[...] Opens the Dialog box Routing folding. Here you will find further technical information on the selected groove.
Reset Resets the radius to the defined value of the composite panel.
