Hardware protection - installing the drivers/license manager
Manual installation of the system drivers for the hardware protection plug is necessary:
• If you want to operate ATHENA as a network license and the hardware protection plug is connected to a server.
• If the driver must be reinstalled for unexpected reasons.
• If the driver has to be updated.
The installation of the license manager is required:
• If you want to operate ATHENA as a network license and the hardware protection plug is connected to a server.
Old Sentinel/SafeNet (Rainbow) SuperPro or SuperProNet hardware protection plugs are not supported and must be replaced. Before installing the drivers, check which hardware protection plug you have. You will find the name of the manufacturer on the hardware protection plug.
On the installation CD in the folder Driver you will find a document in which all available hardware protection plugs are illustrated. If you are not certain which hardware protection plug you have, you can find out with the aid of this document.
Installing the HASP driver
Once you have made sure that you have connected a Sentinel (Aladdin) HASP HL Pro or HASP HL Net hardware protection plug, please carry out the following steps:
1. Place the ATHENA installation CD into your CD/DVD drive and click the Driver button on the start screen. An Explorer window with the folder Driver opens.
2. Change to the folder Hasp HL Driver Setup.
3. Execute the file HASPUserSetup.exe to install the driver.
4. To do this follow the instructions of the installation assistant.
5. Then return to the Explorer window and change to the folder Driver.
