Commands and functions > Usage and management of objects > Bar properties
  
Bar properties
Modifies the properties of one or more bars.
The dialog box is started when you double click a bar and select the option Properties.
Dialog box Properties
db_ath_bar_prope7rties
On the left side the dialog box contains a preview of the trimmed bar. When you modify the bar properties, they are immediately displayed.
On the right side there is the operating section with the tabs:
• Parameter
• Display
Register button Parameter
A description of the options contained in the various drop-down menus can be found in Chapter Parameters for bar assembly.
Multiple parameter change
Changes the properties for other objects which have to be selected. The following procedure is used:
Input request 
Select objects:
Select the bars of which the properties are to be changed. Only the same bars are taken into account.
Register button Display
You will find a detailed description of the display options in the Chapter Display modes.
Dialog box section Visibility
You will find a detailed description of the visibility options in the Chapter Visibility of bar components.
Dialog box section Processes
Create separately
Causes the processes (e.g. drilled holes and notches) to be produced as separate parts.
Sometimes processes on the bar are not shown, because they have been positioned unintentionally outside of the outline. With this option you can check the position of the processes and change the position parameters appropriately.