Tab ATHENA Model > Group Modify > Object to solid body
Menu:
Modeling > Apply > Object to solid body
Toolbar:
ATH Apply > Object to solid body
Command input:
ath_obj_solid
With this command you can convert two-dimensional standard parts, semi-finished products, screwed joints, drilled holes as well as placement plans of profiled sheets into three-dimensional ATHENA solids.
Input request
Select objects:
Select the objects which you want to convert to ATHENA solids. The selected objects are immediately converted into ATHENA solids. This input request is repeated until you press the Enter key.
Note
• Profile section cannot be converted, because they do not have any length information.
• Profile solids are "known" bar assemblies, the names of which consist of the TMP and an incremented number. You will find further information on bar assemblies in the sections Bar assembly manager and Apply bar assembly.
• Sliced or trimmed 2D projections retain their sliced planes or cutouts when the boundary objects are similarly converted. For this, all parts have to be chosen in a selection set.
• Drilled holes, screwed joints and joining elements can also still be modified as 3D objects with a double click.
