Commands and functions > Dimensions > Add leader line
  
Add leader line
Ribbon:
Tab ATHENA > Group Label > Add leader line
Menu:
ATHENA > Dimensions > Add leader line
Toolbar:
ATH Dimensions > Add leader line
ATHENA Dimensions > Add leader line
Command input:
ath_ldr_add
Adds another leader line to a leader. Leader lines can also be complemented for leader labels without a leader line.
When you execute the command, the following appears:
Input request 
Select label or [?]:
Select the label which you want to complement with another leader line.
Specify next point or [Back/?]:
Define the next point of the leader line.
Specify next point or [Back/?]:
Specify a further point to generate a kink point or press the Enter key to terminate the command.
If you press the Enter key directly after the first point request, the arrow tip of the secondary leader line is generated at this point.
You can undo the last input with the option Undo. The input request is repeated.
With the option ? you call the help.
The secondary leader lines are not connected to the original primary leader, but linked such that scale changes, etc. are adapted. Consequently, when to edit a line you can double click the primary leader or a secondary leader line.
Position symbol:
Specify the new position of the label. The arrow tip of the leader line is placed at the previous base point of the label.
This request appears when you select a label without a leader line.
ath_ldr_add
Secondary leader lines
With Scalable leaders the leader lines are always added for all scales, but can be aligned differently retrospectively in various scales.
You will find information on scalability in the section Scalability (label objects).
Associated commands:
• Leader
• Parts labeling
• Remove leader line