In this dialog box you can modify various properties of an inserted infill section. This dialog box is activated when you double click an infill in the drawing.
Dialog box Infill
db_ath_infill_section_modify
Info ... Opens the Dialog box Infill, where you can view the layer structure of the infill. You will find further information on this in the section Info.
Overwrite, left/right Enables the infill definition on the right or left side to be overwritten. To do this, the Dialog box Overwrite infill left/right is opened. You will find further information in the section Overwrite infill.
Parameter Changes the infill parameters. For this, the Dialog box Infill parameters is opened, where you can change various parameter settings. You will find further information in the Chapter Infill parameters.
Shear Displays the infill cut at specified saw and oblique angles in the drawing. The angular settings are carried out in the Dialog box Shear. You will find further information on this in the ChapterShear object.
If you want to edit an infill with the infill manager, you must first release it. Changes only affect the selected infill. If you would like to apply modifications permanently to other infills, you must save them under a new name.
Edge spacer Changes the viewing properties of the edge spacer. To do this, the Dialog box Bar cross-section is opened. You will find further information in the Chapter Bar cross section.
Detach Detaches the object assignment for the infill definition. When you release the attachment, the switch is deactivated.
