Commands and functions > LogiKal interface > Modify LogiKal element
  
Modify LogiKal element
Ribbon:
Not present
Menu:
Not present
Toolbar:
Not present
Command input:
ath_logi_elem_edit
When you click on an existing LogiKal element, this command is started and you can modify the selected element.
Dialog box LogiKal element
db_ath_logi_elem_edit
In the dialog box a preview is shown at the upper left. It provides a visual check of the position.
On the right side of the dialog box there is the operating section with the register buttons:
• Properties
• Settings
• Infills
• Manager
Tab Properties
db_ath_logi_elem_edit_eigenschaften
Here, the job and position properties of the LogiKal element are shown. Changes cannot be made here.
Lot
Defines the lot for the position. Lots must be defined in LogiKal.
Status
Defines the status for the position.
Labeling
Defines the position label. You can save the label in various languages. To do this, choose the required language from the list.
[...]
Opens the Dialog box Label, where you can conveniently edit the designations for various languages. You will find further information in the Chapter Label.
Logikal ...
Starts Dialog box Modify LogiKal element, where you can select which position property you want to modify.
Tab Settings
db_ath_logi_elem_edit_einstellungen
Dialog box section Representation
Symbol
Controls the display of symbols (for example tilt and turn symbols) of the sashes and elements.
Opens the Dialog box Assign Layer. You will find further information on this in the Chapter Layer assignment.
Dialog box section Dimensions
Element
Controls whether the element is dimensioned.
The drawing dimension settings are used for dimensioning. Dimension style, actual text height and dimension layer are displayed for information.
Dialog box section Labeling
Element
Switches the automatic labeling of the elements on or off.
Inserts
Switches the automatic labeling of the inserts on or off.
Infills
Switches the automatic labeling of the infill on or off.
Bars
Switches the automatic labeling of the bars on or off.
Opens the dialog box Label format for the relevant object. You will find further information on this in the Chapter Label format.
Opens the Dialog box Label for the element. You will find further information on this in the Chapter Label.
Dialog box section Use tick boxes
All
Applies the settings to all insertions of the element.
Current
Applies the settings made only to the current insertion of the element.
New
Applies the settings made to all new insertions of the element.
Tab Infills
db_ath_logi_elem_edit_fuellungen
The list shows the infills of the current element. Here, you select the infill, the properties of which you want to change.
Infills (glazing or panels) which have been imported from LogiKal are only displayed simplified during the section generation.
For detailed section displays you should use ATHENA infills.
ATHENA Infill
Causes infills defined in ATHENA to be used.
[...]
Opens the Dialog box For object selection, where you can load a saved infill. See Object selection.
Tab Manager
See section Management of objects.
OK
Closes the dialog box and the selected position is updated.
Cancel
Closes the dialog box and discards the changes.
• Frame element
• New LogiKal element
• Import LogiKal project