A parts list of the infills is generated with this command. It can be directly inserted into the drawing and optionally copied to the Windows clipboard to insert it into another program, e.g. Excel.
To create a parts list, the parts must have an item number and have been allocated to a job with the Project browser.
When you run the command, you may be prompted to update identifiers:
db_ath_tags_update
This happens if you have carried out a common part recognition with the command Assign tags. Identifiers should be updated if there have been dimensional changes to fillings. If in doubt, we recommend that you always update the identifiers, otherwise errors may occur in the BOM.
Dialog box Infill list
db_ath_st3d_panel_list
The dialog box elements are largely identical to those of the dialog box Bar list. You will find the description in the chapter Bar list.
End of program
After termination of the dialog box with OK, then, depending on the setting, the infill list is inserted into the drawing and/or copied to the clipboard. After copying to the clipboard, a message appears which you must confirm. With insertion into the drawing, the following appears:
Input request
Specify insertion point or [Replace/?]: Insert the list into the drawing at the desired point or choose the Replace option to update an existing list.
With the option ? you call the help.
Note
The individual layers of the infills are analyzed if the option Analyze all layers is activated in Dialog box Apply infill.
Note: This function produces lists of infills. CAD-PLAN GmbH can in no way be held liable for the results of this function and any errors and losses arising from it.
